Home

1. Instructions after installing Mutosi Hydrogen alkaline water purifier

Readers can refer to the machine installation and general usage instructions HERE .

After installing the Mutosi Hydrogen alkaline water ionizer, you need to take a few steps to ensure the best quality of drinking water.

During the first flush, you may notice that the water is slightly dark brown and contains some tiny particles of coal dust. This is completely normal and does not pose any health risks.

These carbon dust particles come from the activated carbon filter core, which absorbs dirt, chlorine and other impurities in the water. When the water flows through, the carbon dust particles will be washed away and out. From the following filtration times, you will never see this phenomenon in the water again. Therefore, after installing the filter, the manufacturer recommends that you flush the first 4-5 times of water before drinking the water to ensure health safety.

When you first start using it, you should flush the first 4-5 times.

2. Instructions for using Hydrogen alkaline water purifier

2.1 Water modes of Mutosi Hydrogen alkaline ionizer

The modern Mutosi Hydrogen alkaline water purifier provides you with a variety of water options to meet a variety of usage needs. Specifically:

• Purified water: Suitable for all subjects from children, adults, the elderly to people undergoing medical treatment. Purified water can be drunk directly, mixed, cooked
• Hot/cold water: Used to make tea, coffee or other drinks that require a certain temperature.
• Hydrogen Alkaline Ionized Water: Suitable for use by certain groups such as children over 6 years old, adults under 80 years old, people being treated for certain diseases such as stomach pain, high blood pressure, cardiovascular disease, etc. Hydrogen Alkaline Ionized Water is most effective when used for direct drinking.

Note: Hydrogen alkaline ionized water should not be used to mix infant formula and certain medications.

Mutosi hydrogen alkaline water purifier provides 2 modes of pure water - hydrogen

To maximize the benefits of the Mutosi Hydrogen alkaline ionized water purifier, you should combine both water modes. Pure water is used for daily living purposes, while Hydrogen alkaline ionized water is used for health care.

2.2 Instructions for getting water from Mutosi Hydrogen alkaline ionizer

Mutosi water purifier is designed with a smart touch control panel, helping you easily get water as you want. With just a few simple steps, you will have a glass of pure water or hydrogen-rich alkaline ionized water.

• Step 1: Select water mode
• Step 2: Adjust the capacity: Some Mutosi water purifiers allow you to adjust the amount of water taken out by pressing or dragging the touch bar.
• Step 3: Start getting water: After selecting the mode and capacity, you just need to place the cup under the faucet and wait for the water to flow out.

width:800px" />

The touch operation to get water is extremely simple on the Mutosi hydrogen alkaline ionizer

3. Instructions for maintenance of Hydrogen alkaline ionized water purifier

To ensure that the water purifier always operates stably and provides clean, pure water, you should clean and maintain the machine periodically every 6-12 months. Below are detailed instructions:

Step 1: Clean the outside of the filter

• Power off: Disconnect the purifier from the power source and water source to ensure safety during cleaning.
• Prepare tools: Prepare a soft cloth, soft bristle brush, filter removal tool (if any).
• Cleaning: Use a soft, damp cloth to wipe away dust and dirt from the machine's surface, buttons, faucets and other external parts.
• Check connections: Check pipes and joints for leaks or damage.

Step 2: Replace the rough filter core and RO core system

Disassembly:

• Open the filter cups counterclockwise.
• Remove the old filter cartridges from the cup.
• Rinse the filter cups with clean water and drain.

Install new filter:

• Peel off the packaging of the new filter cartridge.
• Install the new filter cartridge into the filter cup in the direction indicated by the arrow.
• Close the filter cups tightly.

• Install the filter cup into the machine in the same order as before.
• Connect the purifier to the power source and water source then flush for 30 - 40 minutes to remove all dirt.

Step 3: Clean or replace the electrode system

This is an extremely important step to ensure that the output water quality is always stable and rich in hydrogen. After a period of use, the performance of the Hydrogen alkaline ion supplement filter core or the Hydrogen alkaline ion electrolysis plate will gradually decrease. Therefore, you should:

• Regular testing: Periodically test water parameters such as pH, ORP to evaluate the performance of the electrolysis system.
• Cleaning: Following the manufacturer's instructions, you can clean some parts of your electrolysis system at home. However, cleaning the internal components should be done by a professional technician to ensure safety and efficiency.
• Replacement: When the electrolysis system is too old or damaged, it needs to be replaced with genuine new parts.

To ensure that cleaning and maintenance are carried out professionally and efficiently, Mutosi offers the Procare service. This service includes:

• General check: The technician will check the entire water purifier system, from the external parts to the internal components.
• Cleaning: Thoroughly clean all machine parts, especially the electrolysis system.
• Component replacement: If necessary, the technician will replace damaged components with genuine components.

Procare Mutosi service helps you clean and maintain water purifiers quickly and safely.

4. Things to remember when using Hydrogen alkaline water purifier

To ensure the water purifier works effectively and provides pure, hydrogen-rich water for your family, you need to note the following:

• Regular inspection and maintenance: Inspect, clean and replace the filter according to the manufacturer's recommended schedule.
• Exterior cleaning: Clean the machine regularly with a soft damp cloth to remove dust.
• Do not use strong detergents: May damage machine parts.
• Do not attempt to repair yourself: If the machine has a problem, contact the warranty center for support.
• Input water source:
  • Quality: Ensure the input water source is clean and does not contain too many impurities to prolong the life of the machine.
  • Pressure: Supply the machine with water at the appropriate pressure as recommended by the manufacturer.

You should be aware of some notes when using Mutosi hydrogen alkaline water purifier to ensure the output water is safe and good for your health.

Through this article, Mutosi has helped you learn about how to use and maintain the Mutosi Hydrogen alkaline ionized water purifier. By following the instructions correctly, you will have a source of pure, hydrogen-rich water to take care of the health of your whole family.

If you have any questions, please call hotline 1900.636.595 for quick advice and support.