Giải pháp nước sạch

1. Standard QCVN 6-1:2010/BYT of the Ministry of Health

QCVN 6-1: 2010/BYT is a national technical regulation stipulating food safety indicators and management requirements for natural mineral water and bottled drinking water, used for beverage purposes.

Details on the circular promulgating National Technical Regulations for natural mineral water and bottled drinking water can be found here .

1.1. Benefits of QCVN 6-1:2010/BYT standard for consumers

QCVN 6-1: 2010/BYT is the highest national standard for direct drinking water today. In addition, some water sources are filtered by water filtration systems that meet Japanese standards, ensuring the health and safety of users.

Drinkable water source

Water sources that comply with quality standards QCVN 6-1:2010/BYT will be controlled for 21 mandatory physical and chemical indicators and 5 mandatory microbiological indicators. Physical and chemical indicators include Arsenic, Ammonium, Lead, Cyanide, Mercury, radioactive substances, etc. Microbiological indicators include E.Coli, Coliform, etc.

When choosing natural mineral water products, bottled drinking water, water purifiers or hot and cold water filters , you should pay attention to whether the product complies with the standards. The filtered water source meets the standards of QCVN 6-1:2010/BYT for direct drinking water or not. In case the product meets the standard certification, you can rest assured to use that water source for direct drinking.

Highest national standards for direct drinking water

QCVN 6-1:2010/BYT of the Ministry of Health is currently the highest national standard for direct drinking water in Vietnam. To be able to use directly, these water sources must be purified of toxic components such as arsenic, nitrite, manganese, harmful microorganisms... to meet the requirements of QCVN 6-1:2010/BYT.

Note: Only water filters that produce water that meets the National Standard for Direct Drinking Water QCVN 6-1:2010/BYT can ensure the safety of users' health. This is also the top criterion when choosing to buy a water filter.

However, not all water filtration devices can produce water that meets QCVN 6-1:2010/BYT standards. It should also be noted that the ability to ensure such effective water filtration needs to be fully, independently, and objectively evaluated, verified, and confirmed by reputable and professional organizations.

Alkaline water purifiers maintain a pH balance between 7.35 - 7.45. This is the ideal value range to maintain a balanced and healthy state for the body - According to the US National Library of Medicine (NIH). If you are looking for this product line and need to ensure that the filtered water meets the standards of QCVN 6-1: 2010/BYT, the Mutosi brand will be a choice worth your attention.

1.2. Unit responsible for inspection QCVN 6-1: 2010/BYT

Currently, according to the issued document, the Ministry of Health assigned the Department of Food Safety and Hygiene to preside over and coordinate with relevant authorities to guide the implementation and organization of the implementation of QCVN 6-1: 2010/BYT.

Regarding standard inspection units, there are currently some prominent units such as Quacert, Quatest, Institute for Research and Development of Quality Standards, Vinacontrol...

The above mentioned standard inspection units are all highly reputable. Among them, we can mention: Vinacontrol, formerly known as the Import-Export Goods Inspection Department under the Ministry of Trade, is now the Ministry of Industry and Trade. Vinacontrol is a pioneer in the field of inspection, testing, certification and quality assessment in Vietnam. Vinacontrol was established in 1957 and has been operating in the field of standard inspection for more than 60 years.

Mutosi water purifier ensures that the filtered water meets QCVN 6-1:2010/BYT standards for direct drinking water, certified by Vinacontrol.

Leading water filtration equipment manufacturers today such as Mutosi always strive to improve product quality, improve RO filtration technology to ensure strict compliance with QCVN 6-1:2010/BYT standards of the Ministry of Health. According to experience in buying water purifiers , water source through Mutosi water purifiers ensures quality according to the standards of the Ministry of Health, ensuring safety, health benefits for consumers and can be drunk directly.

2. QCVN 6-1: 2010/BYT certification inspection process for water purifiers

Currently, the process of testing water purifiers to meet QCVN 6-1: 2010/BYT is being implemented according to official guidelines of WHO and UNICEF, and is recognized by ISO 9001:2010 by the General Department of Standards, Metrology and Quality, Ministry of Science and Technology.

2.1. Inspection process

The testing process must ensure that the product passes a series of rigorous water treatment efficiency tests and monitoring assessments.

2.2. Inspection steps

The process of testing water purifiers according to standards must follow these steps:

style="width:100%">

STT

Inspection steps

Detail

1

Check the product to be inspected

The inspection unit will examine the outside and inside of the device to see if there is any damage to the components or if there is any change in color, shape, breakage, damage, or moisture. Only products that meet quality standards will be sampled.

2

Sample

Each batch of water purifier products will be randomly selected 3 products for testing. Each product will be tested 3 times.

3

Perform testing

Water filtered through the water purifier will be tested in 2 types according to WHO guidelines.

• Technology Non-Specific

• Harmonized testing protocol

Both types of tests are performed on both input water samples (before filtration) and output water samples (after filtration). The input water sample is created from the domestic water sample and additional substances with a minimum assessed content 10 times higher than the corresponding substance content specified in QCVN 6-1:2010/BYT.

Input water samples were also prepared with a microbial concentration of 105/100mL to test microbiological indicators.

4

Evaluate the results

After being tested through the steps and the results meet 26 mandatory criteria and 1 voluntary criterion on chemistry, physics and microbiology according to QCVN 6-1: 2010/BYT, the water purifier will be granted a certificate at 3 levels and announced on the inspection unit's website.

The three levels are:

• Highly Protective: Highly protective

• Protective /Limited Protection: Has the ability to protect

• None Protective: None Protective.

5

Monitoring and control

During the period that the water purifier product is used in the market, the inspection unit will randomly test the output water quality of at least 1% of the circulating products.

If any random test parameter is found to be unsatisfactory, the product's standard certificate will be revoked and officially announced on the inspection unit's website.

3. Mutosi - Filtered water meets QCVN 6-1:2010/BYT standards for direct drinking water, certified by Vinacontrol

Mutosi water purifiers have been evaluated and confirmed by Vinacontrol Group, a prestigious domestic and international professional organization in conformity assessment. The filtered water meets the standards of QCVN 6-1:2010/BYT for direct drinking water.

With an independent and objective evaluation, appraisal and testing process, Mutosi water purifier products have undergone challenging experiments that far exceed the requirements for water filtration efficiency according to conventional standards.

The difference of Mutosi products has been confirmed not only with normal water sources but also with water sources with pollution levels up to 10 times higher than the allowable limit.

The difference between filter membrane and filter core

Mutosi water purifiers apply RO filtration technology with MUTOSI RO membrane - advanced Slitec technology. Using Mutosi RO membrane, customers also save a lot of costs thanks to the very long average life of the membrane from 36 to 60 months.

• Manufactured on a modern production line in Korea. Using the world's leading high-end membrane from the US, double the filtration capacity compared to conventional filters.
• The membrane can reject salt at a rate of up to 99% and has a recovery capacity of more than 50% pure water.

The filter core of Mutosi water purifier is Alkaline Hydrogen filter core, which helps to add dissolved Hydrogen gas to water. This also helps to neutralize the acidity in your body by reducing excessive acid content in the stomach and digestive tract. Hydrogen gas is also an antioxidant, helping you reduce inflammation, reduce the risk of metabolic syndrome and protect the nerves.

The filter membrane and filter core of Mutosi water purifier not only help you have clean, drinkable water but also help you have healthy water and save a lot of maintenance costs and replace the filter membrane and filter core.

Not only clean but also good for health

Are you wondering if a direct drinking water purifier is good ? Not only does it provide clean, safe water that can be drunk directly from the tap, but the water from the Mutosi water purifier is also good for your health.

• The 3-level rough filter system can completely remove moss, rust, larvae, odor-causing gases, and organic matter in water.
• RO filter membrane with super small filter holes helps filter out up to 99.99% of viruses, bacteria, and heavy metal ions in water.
• GAC-T33 functional filter cores, mineral stone cores, nano silver cores, far infrared cores... help stabilize the sweetness of water, add beneficial micro-minerals to the body, increase pH, and enhance absolute sterilization of output water.
• 4 in 1 technology - using specialized Hydrogen core brings 4 benefits to customers' health:
  • Adding activated Hydrogen molecules to water helps reduce oxidants and eliminate harmful free radicals in the body.
  • Reduces the ORP index of water, increases pH, and helps neutralize excess acid in the body.
  • Supplementing some minerals such as Ca, K, Na… is beneficial for your health.
  • Creates conditions to support more effective absorption of minerals and nutrients for the body.

Above is all the necessary information about the QCVN 6-1: 2010/BYT standard of the Ministry of Health. When looking to buy water treatment products such as water purifiers or Mutosi hot and cold water dispensers , you should prioritize products that meet this output water standard.

Mutosi is honored to accompany customers to bring not only clean and safe water sources. Contact Mutosi to receive quick and timely advice on quality standard water purifier products.

See also: Best hot and cold RO water purifier